|
|
|
In-ceiling Speakers
-
This is a 6″ Speaker Square Grille Baffle, for use with the following Bowers & Wilkins speakers: CCM362, CCM665, CCM664, CCM663 OR CCM662.
-
This is a 8″ Speaker Square Grille Baffle, for use with the following Bowers & Wilkins speakers: CCM382, CCM684, CCM682, CCM683.
-
This is a Back Box designed especially for Bowers & Wilkins Custom Installation In-Ceiling speakers.
-
Designed for the CI800 Series CWM8.5 Speaker
-
The Bowers & Wilkins In-Ceiling Speaker CCM362 comes with a round baffle and optional square baffle available, and like all the models in the CI 300 Series it features an elegant minimal-width border design.
-
The entry-point in the CI600 in-ceiling range, the Bowers & Wilkins In-Ceiling Speaker CCM665 is perfect for smaller listening areas like bathrooms or kitchens.\r\n
-
The Bowers & Wilkins In-Ceiling Speaker CCM664 features an adjustable, tilt-offset 25mm (1in) soft dome tweeter, and a 150mm (6in) woven glass fibre bass/midrange driver.
-
The two-way Bowers & Wilkins In-Ceiling Speaker CCM684 features a 200mm (8in) woven glass fibre cone bass/midrange driver and a soft dome tweeter in a neat circular ceiling mount chassis.
-
The Bowers & Wilkins In-Ceiling Speaker CCM382 is a two-way in-ceiling loudspeaker, balanced for wide-angle listening.
-
The Bowers & Wilkins Ceiling Speaker CCM664SR is a dual, 2-way ceiling speaker combining two offset tweeters and a twin voice coil bass/midrange driver to allow either for a combined stereo signal from 1 speaker or for rear-channel surround sound.
-
The Bowers & Wilkins In-Ceiling Speaker CCM663 features a Nautilus swirl-loaded 25mm (1in) aluminium dome tweeter that pivots for adjustable off-axis treble response.
-
RD stands for Reduced Depth, signifying that this model will fit into tighter spaces than its parent model, CCM663.
-
CCM632 squeezes a full-range driver with beautifully well-balanced sound into a 150mm diameter install space. The space taken may be small, the sound is anything but. CCM632 features an integral enclosure to avoid acoustic bleed.
-
The Bowers & Wilkins In-Ceiling Speaker CCM662 is a high-performance speaker which features a Nautilus swirl-loaded 25mm (1in) aluminium dome tweeter that pivots for adjustable off-axis treble response.
-
The Bowers & Wilkins Ceiling Speaker CCM663SRR is a high-performance, in-ceiling surround speaker that’s ideal for the surround sound channel in a home theatre set-up, or for bringing stereo sound to rooms where space is limited.
-
The Bowers & Wilkins In-Ceiling Speaker CCM683 features a 200mm (8in) Kevlar® cone bass/midrange driver and a Nautilus swirl-loaded aluminium dome tweeter that pivots for adjustable off-axis treble response.
-
The Bowers & Wilkins In-Ceiling Speaker CCM682 is a high performance ceiling-mount speaker featuring a 200mm (8in) Kevlar cone bass/midrange driver.
-
A high-quality, down-firing ceiling speaker, CCM Cinema 7 features 25mm Nautilus swirl loaded aluminium tweeter and 180mm Kevlar bass/midrange driver for superior audio clarity and power.
-
While it might be the entry level speaker in the CI700 in-ceiling range, the Bowers & Wilkins In-Ceiling Speaker CCM7.5 certainly doesn’t skimp on high-spec features
-
The CCM7.4 speaker features a wealth of high performance technologies, including two 130mm (5in) bass/midrange Kevlar® drivers set in a rigid die-cast chassis and a Nautilus™ tube-loaded 25mm (1in) soft dome tweeter.
-
CCM8.5 is a two-way in-ceiling loudspeaker. It features a Carbon Braced Tweeter and a single 7inch bass/mid Kevlar driver, with anti-resonance plug.
-
Setting a whole new standard for in-ceiling sound quality, the top-range CCM7.3 is a three-way speaker.
1 2 Next »
|
|
|
|