ML-MOAFXBL AFX Dolby Atmos Spk - MartinLogan Dolby Atmos Speakers
Motion AFX Dolby Atmos® Enabled Speakers
MartinLogan Motion AFX Dolby Atmos enabled speakers are designed to create a height layer of sound above the listener that better connects viewers with the richness, detail and clarity of the on screen experience.
The Motion AFX is designed to sit on top of floorstanding and bookshelf speakers in MartinLogan’s Motion series. These models include the Motion 15, 20, 35XT, 40 and 60XT. Designed to reflect sound off of the ceiling in a Dolby Atmos entertainment system, The AFX will also work with other brands of speakers with a flat top. For systems where a speaker-top mounting is not possible, other installation options are available.
Immersive Dolby Atmos Experience
Dolby Atmos delivers captivating sound that places and moves audio anywhere in the room, including overhead, to bring entertainment alive all around the audience. Whether you are listening to music, movies, television shows, or playing your favorite video games, Dolby Atmos delivers the full impact of the entertainment experience.
Each Motion AFX speaker features a 0.75-inch aluminum dome tweeter and 5.25” polypropylene cone bass/midrange driver with stamped steel basket, all incorporated into a beautiful High Gloss Black cabinet. The shape of the Motion AFX cabinet is specifically designed to angle the drivers towards the ceiling in order to accurately deliver a Dolby Atmos sound experience above the listeners.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories.
|Motion FX||Motion AFX|
|Frequency Response||70–25,000 Hz ±3dB||90–20,000 Hz ±3dB|
|Dispersion||160° x 80°||N/A|
|Sensitivity||91 dB/2.83 volts/meter||87 dB/2.83 volts/meter|
|Nominal Impedance||4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.||4 Ohms. Compatible with 4, 6 or 8 ohm rated amplifiers.|
|Recommended Amplifier Power||20-160 watts per channel||20-200 watts per channel|
|Crossover Frequency||4500 Hz||2,000 Hz|
|Crossover Components||Custom air core coil inductors. Polyester film capacitors in series and low DF electrolytic capacitors in parallel. Overall system thermal/current protection.||Custom air core and low dcr steel laminate inductors. Polyester film capacitors in series and low DF electrolytic caps in parallel.|
|High Frequency Transducer||Two 1" × 1.4" (2.6cm × 3.6cm) Folded Motion Transducer with 5.25" × 1.75" (13.3cm × 4.4cm) diaphragm||0.75” (1.9cm) aluminum dome|
|Low Frequency Driver||5.25" (13.3cm) paper cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes. Folded bass reflex port.||5.25” (13.3cm) polypropylene cone with stamped steel basket.|